How to clean Coway air purifier. Features of most popular Coway AP 1512HH

Air purifiers are an essential piece of equipment that every home should have. It improves indoor air quality. However, it is important to keep the filters clean at all times for the device to work properly. You can read more about how to clean the Coway air purifier and the features of a pre-filter, a deodorizer, and a HEPA filter in this article.

How to clean Coway air purifier

If you wonder how to clean Coway air purifier filter, the instruction depends not only on the type of filter. For better operation of the air purifier, it is necessary to periodically clean it completely.

Before starting work, the air purifier must be disconnected from the power supply. You need to work with special detergents, which do not contain organic solvents, abrasive particles, bleach, and chlorine. If you do not know how to clean Coway air purifier, you can read the detailed information below.

Cleaning the ventilation and grate

It is very important to clean not only the filters.

Particular attention should be paid to the ventilation hole and the removable grille because a lot of dust accumulates in these places. The cleaning process is quite simple, and consists of the following steps:

1. Raise the ventilation grill, which is located at the top of the opening of the same name.
2. Use a soft brush, cloth, or vacuum cleaner to clean the ventilation. Make sure that dust does not get inside the air purifier.
3. Replace all parts.

Cleaning the air quality sensor

If your home is quite dusty, the air quality sensor should be cleaned every month. The inlet and vents should be cleaned with a soft brush or a special vacuum cleaner. Make sure that dust does not penetrate the internal parts of the air purifier.

Using the slots, you need to open the air quality sensor cover, which is located at the top of the rear panel. Wipe it with a rag, and assemble the structure.

You may also be interested: Humidifier tips: What kind of water to use in humidifier

Cleaning the front cover

It is very important to periodically clean the front cover of the Coway air purifier because it also accumulates a lot of dust and dirt. The cleaning process is quite simple, and consists of the following steps:

1. Remove the front cover.
2. Wipe off the dust that is on the surface with a dry soft cloth or use a vacuum cleaner.

If you need to clean the entire body, you should also use soft materials. In case of heavy soiling, a damp cloth can be used, however, the use of abrasive particles is prohibited.

Cleaning the pre-filter

If you need to clean the pre-filter, follow these tips:

1. Remove the front of the cover, then remove the pre-filter itself. There is a special handle for this.
2. You need to work with a damp cloth or a vacuum cleaner, depending on the degree of contamination.
3. If you cleaned the air purifier with a damp cloth, wipe it dry and reinstall it.
4. Close the front cover.

Wash the pre-filter 1-2 times a month. Often users ask the question, can you wash a Coway HEPA filter? Contact with water is undesirable. Make sure that water drops do not fall on the filters; otherwise, the pores become clogged and do not purify the air quality.

Pre-filter, a deodorizer, and a HEPA filter installation

Several filters are installed inside the Coway air purifier, including a pre-filter, a deodorizer, and a HEPA filter. Each of them has a specific purpose.

Purpose of filters

The pre-filter purifies the air from large contaminants, mold, and dust. A deodorizing filter is essential to eliminate unpleasant odors in a room. The HEPA filters are required to remove fine dust and cigarette smoke.

How to install filters?

If you need to install a new filter, follow these instructions:

1. Open the front of the cover by pulling on the top.
2. Take out the old filter and remove the plastic packaging. The pre-filter must not be touched.
3. Collect all the filters that should be in the air purifier. You need to start with a HEPA filter. Then assemble the deodorization filter.
4. Install the two tabs that should be at the bottom of the front cover into the slots provided. This puts the cover back in place.

Replacing filters in a Coway air purifier

Filters should be replaced every year. However, it should be understood that the terms of replacement filters may vary, depending on the conditions of your residence, as well as the frequency of use of the device.

For the replacement filter, you need to use the original filters, which are also supplied to the market by Coway AP 1512HH. This keeps the Coway air purifier in proper working condition, and you can be sure that the purifier does not fail. Replacement of deodorizing and HEPA filters is carried out according to the following instructions:

1. Remove the front cover, and take out the pre-filter.
2. Next, you need to get the HEPA filter and the deodorization filter.
3. In their place, install new parts, from which you must first remove the plastic packaging.
4. Reassemble the Coway air purifier and close the front cover.

What do the indicator lights on the Coway air purifier mean?

As you know, almost all modern air purifiers are equipped with special light indicators that allow you to determine the quality of the air in the room. All of them are located at the top of the Coway air purifier.

If the blue color starts to burn, then the air in the room is clean. Some models may glow green, which means the lightness of the air.

You may also be interested: Why is my room so dusty: 5 reasons, how to fix it?

The yellow color on the air quality indicator shows heavy air. If the dark purple LED starts to glow on the air quality indicator, it means that the air is polluted.

Red deserves special attention. It says that the air in the room is heavily polluted, so immediate cleaning is required.

What should I do if the red light is constantly on?

If the air in the room is of poor quality, as indicated by the red color of the LED, the situation should be analyzed. If this happens even after the Coway air purifier has been running for a long time, you have to adjust the particle sensor.

If you need to adjust the sensitivity of the sensor, follow these recommendations:

1. Press the air speed button and the ionizer button at the same time. Hold them together for a few seconds. You may need to hold down the mode button. It all depends on the air purifier model you are using. Clamping must be carried out when the Coway AP 1512HH is running.
2. The speed indicator flashes periodically at 1-second intervals. In this case, the glow will be accompanied by a sound signal. The blinking of the indicator indicates that the air quality sensor is sensitive.
3. Then you need to press the speed button to adjust the sensitivity. If this happens at 1-second intervals, then the Coway air purifier is sensitive. 2 seconds speaks of standard work. 3 speed indicates low sensitivity.

Next, you need to hold down all the buttons again and hold them for a few seconds. This helps normalize the operation of the air purifier sensor. If the airflow rate button and the ionizer button do not respond to pressing for more than 10 seconds, the sensitivity will be adjusted automatically.

Coway air purifier setting principle

If the Coway air purifier is connected to the mains, it works automatically. If you need to choose a manual method of work, follow these tips.

Start the Coway air purifier by pressing the power button. After, you need to press the speed button to adjust the fan. If you want the Coway air purifier to work automatically, you should hold the speed button to start the automatic mode.

Press the buttons until the ECO mode indicator lights up. The auto mode is more efficient because it independently determines the fan speed. There are 3 speeds in total.

Dependence on air quality

They can change, depending on air pollution, for which the air quality sensor is responsible. The higher the pollution level, the faster the fan runs to purify the indoor air faster. Eco-mode slows down the fan so that less power is consumed. It starts as soon as half an hour after the air remains clean.

How to activate or deactivate the timer?

Some Coway air purifiers can be operated with a timer. Its main task is to trigger an automatic shutdown of the Coway air purifier at intervals of 1, 4, or 8 hours. If you want to turn off the timer, you must press and hold its button for a few seconds to turn off the timer.

Reset your Coway air purifier

If the reset indicator starts to glow, then you should start replacing the filters. If the odor indicator lights up, the deodorization filter needs to be replaced. The glow of the HEPA LED indicates the need to replace the HEPA filters.

The air pollution level indicator does not turn off when the pre-filter replacement indicator is activated. To reset, you need to hold down the reset button for a few seconds, as soon as the filter is replaced.

You can forcefully reset the pre-filter replacement cycle to factory settings so that all settings are at default. This is recommended if the pre-filter has been replaced before the filter replacement cycle has expired. To force a reset, hold down the reset button for a few seconds. This is done if the function is not running.

You can also select a pre-filter that is forced to reset. To do this, you need to hold down the corresponding button. To start the odor indicator, press the button once. To start the HEPA filter indicator, hold down the button twice.

As soon as you select the pre-filter to reset, you should press the reset button and hold it for a few seconds. Due to this, the set time, which is displayed on the electronic counter, is erased. The forced reset mode is canceled if no input is made within 5 seconds.

Why don’t Coway air purifiers blow air?

If no air is blowing from the Coway air purifier, it is not receiving power. It may also be a signal that the front cover is not completely closed. The connection of the power cable should be checked, as well as the power supply itself.

You should also check if the display is running. And check how well you closed the front cover.

How to clean Coway air purifier and get rid of the bad smell from the air outlet?

If you start noticing that an unpleasant odor is coming out of the air outlet, you should check the cleaning cycles, as well as the need to replace the filters. If necessary, the filters should be cleaned or replaced altogether.

Where to install a Coway air purifier

You need to install the Coway AP 1512HH in places where there is no blockage of air circulation. Not the best solution would be to install it in a place where there is direct sunlight. It is best to place the air purifier away from heat sources, including heaters.

The air purifier must not come into direct contact with water. Therefore, avoid places with high levels of humidity.

Also, you should not put it on the windowsill because rainwater can get on the Coway air purifier through the window. Do not use the Coway air purifier in places where gases that quickly ignite are used or stored.

Keep the Coway AP 1512HH away from places where combustible materials are stored. The air purifier must not be placed on an inclined surface.

It is best to place appliances on flat surfaces in rooms where you spend a lot of time. It can be a coffee table in the living room or a bedside table in the bedroom.

Some housewives try to install the appliance in the kitchen to remove unpleasant odors during the cooking process. However, this is not the best idea. After all, vapors and fats can clog filters, so you have to change them much more often. In the kitchen, water may enter the unit, causing the air purifier to malfunction.

Service recommendations

If you manage the Coway AP 1512HH, the device delight you with long and efficient operation.

It is important to study in advance what functions each button is responsible for. This greatly simplifies the process of caring for the Coway air purifier.

There are special indicators on the air purifier that allow the Coway AP 1512HH to work continuously and without interruption.

If you decide to buy Coway AP 1512HH, you should follow the basic care tips, which will be discussed below.

Replacing and cleaning filters

If the filter begins to fill with dust, or it is time to replace it, you should immediately purchase and install a new filter on your Coway AP 1512HH. This will ensure effective air purification.

Tracing indicators

It is important to monitor how the indicators work promptly. After all, they can inform you about the need to clean the Coway air purifier, or about air quality.

If the green or purple LEDs start to glow, the air purifier can be turned off because the air is already clean.

This saves energy and does not overload the Coway air purifier. If the red light comes on, start the cleaner immediately. Let it work until the air quality in the room improves.

I also recommend reading – How long to run air purifier?

Removing plastic packaging from new filters

If you bought a new filter and plan to install it inside the air purifier, do not forget to remove the packaging and film from it. This ensures the correct operation of the Coway AP 1512HH.

Drying the cleaned filters

As already mentioned, after cleaning, the filters must be dried or wiped dry. Only thanks to this, you can extend the life of the Coway air purifier.

Additional tips

In addition to the above tips, follow a few more recommendations:

• do not put unnecessary items inside the air purifier;
• you must change the pre-filter in time;
• regularly clean the housing of dirt;
• do not throw away the instruction manual to make it easier to understand the operation of the Coway air purifier;
• use the Coway air purifier only indoors;
• choose the right place for installation.

Results

As you can see, cleaning the air purifier from Coway is quite simple. Once you remove the front cover of the case, all internal parts are visible and replacement is not difficult. Wonder how to clean Dyson air purifier filter, read the article.